End Suction Fire Pump

1. Unique end suction structure, high flow water delivery is more efficient

The End suction Fire Pump adopts a single end suction structure design, with smooth flow channels and a large flow area, effectively reducing water flow resistance and achieving a hydraulic efficiency of up to 88%. The flow coverage is 50-2000m ³/h, with a lift range of 20-160m, which can easily meet the high flow fire water supply needs of large-scale factories, municipal pumping stations, and other facilities. At the same time, the end suction structure has strong suction and discharge capabilities, excellent self-priming performance, and can quickly establish stable water pressure, ensuring sufficient water output from remote fire hydrants and high-rise sprinkler systems without blind spots in water supply.

2. Flexible pipeline adaptation, convenient installation, and cost saving

The inlet and outlet of the End Success Fire Pump are located on the same side and have a wide range of caliber specifications (400mm and below are available in multiple sizes). It can be directly embedded into the existing fire pipeline system without the need for significant changes in pipeline layout, especially suitable for old building fire renovation, pump room upgrades, and other projects. The body adopts a horizontal layout with a low center of gravity and strong installation stability, suitable for various installation environments such as computer rooms and floors. The construction period is shortened by 40% compared to traditional pump types, significantly reducing installation costs.

3. Pull back maintenance design reduces operation and maintenance costs by 50% directly

The innovative pull-out structure design of the End Success Fire Pump eliminates the need to remove the pump casing and inlet/outlet pipelines during maintenance. Simply remove the coupling to extract the rotor components for inspection, greatly reducing maintenance difficulty and downtime. Wear resistant mouth rings are equipped before and after the impeller, which can accurately compensate for wear clearances and maintain efficient operation of the water pump for a long time; The overcurrent components can be made of cast iron or 304 stainless steel, which are corrosion-resistant and wear-resistant. They are suitable for various medium temperature conditions ranging from -15 ℃ to 120 ℃, and only need to be checked regularly for sealing status. Maintenance is worry free and labor-saving.

4. Electric high-efficiency drive, fast and reliable response

The End Success Fire Pump is equipped with a high-quality dedicated fire motor, which has strong and stable power output and is compatible with 380V industrial standard voltage. It supports dual modes of fire control system linkage and on-site manual start-up, with a start-up time of ≤ 5 seconds, in compliance with fire emergency response regulations. The motor has an insulation level of F and a protection level of IP54, with excellent dust and waterproof performance. It can operate stably for a long time under complex fire conditions, with an operating efficiency of over 78% and significant energy-saving effects.

5. Full compliance certification, worry free fire inspection

Our End Success Fire Pump is designed and manufactured strictly in accordance with fire safety standards and has passed the mandatory 3CF product certification. The pump body is cast with clear rotation direction arrows and equipped with pressure and vacuum gauges with an accuracy of not less than 2.5 levels. All details fully comply with fire safety acceptance requirements. The core components have undergone rigorous pressure resistance, high temperature resistance, and aging tests, with a failure rate as low as 0.3% or less, providing authoritative quality assurance for the stable operation of the fire protection system and helping the project pass the fire protection acceptance in one go.