XBD-ISW Horizontal End Suction Fire Sprinkler Pump for Fire Protection Systems | Tengsheng

Send Inquiry
XBD-ISW Horizontal End Suction Fire Sprinkler Pump for Fire Protection Systems | Tengsheng
Details
The automatic sprinkler fire extinguishing system is the "first line of defense" for suppressing fires in the early stages, and the stabilizing performance, starting speed, and reliability of the sprinkler pump directly determine the efficiency of fire extinguishing.
Category
Horizontal Fire Fighting Pump
Share to
Description

Product Overview

 

The XBD-ISW Horizontal End Suction Fire Sprinkler Pump is a direct-coupled centrifugal pump designed for reliable water supply in automatic sprinkler and hydrant systems. Its horizontal end suction structure with common base plate and coaxial motor mounting delivers stable flow and pressure for building, commercial, industrial, and municipal fire protection applications.

 

With flow rates from 10 to 200 L/s and heads from 30 to 110 m, the pump can be configured according to project-specific hydraulic requirements. Cast iron casing, bronze impeller and mechanical seal are standard; electric motor drive, complete fire pump set configurations and flange sizes from DN50 to DN200 are available for different system designs and local fire code compliance.

 

Each pump is performance tested before shipment, and technical documentation, dimensional drawings and selection support can be provided for project evaluation.

product-750-750
Parameter Specification
Product Type Horizontal End Suction Centrifugal Fire Pump
Pump Model XBD-W
Installation Horizontal / End Suction
Flow Rate 15 – 120 L/s
Head 32 – 160 m
Motor Power 7.5 – 160 kW
Speed 2900 rpm
Drive Type Electric Motor
Pump Material Cast Iron
Connection DN50 – DN200 / Flange
Voltage 380 V / 50 Hz / Customized
Application Fire Protection / Building / Industrial / Municipal
Certification Available

 

 

The Core Advantages Of Horizontal Fire Sprinkler Pump

 

High-Efficiency Direct-Coupled Design

The pump is directly coupled to the motor without belts or couplings, achieving pump efficiency up to 82% and eliminating alignment maintenance, with non-overloading power characteristics across the full curve to meet NFPA 20 requirements.

Stable Fire Hydraulic Performance

The optimized volute and impeller produce a flat head-capacity curve, delivering consistent discharge pressure from zero to rated flow, ensuring sprinklers and hydrants receive stable pressure at every duty point.

Back-Pull-Out Easy Maintenance

The rear bearing bracket allows the entire rotating assembly to be withdrawn without disconnecting suction and discharge piping, reducing impeller, seal or bearing replacement to under one hour of downtime.

Corrosion-Resistant Material Options

Standard cast iron casing with bronze impeller suits clean water, while 304/316 stainless steel wetted parts are available for corrosive water conditions, and renewable wearing rings protect the casing from abrasion over long service life.

Flexible Configuration & OEM Support

Dual-pump duty/standby arrangements, variable frequency drive, private-label branding and custom control logic are all available; flange sizes from DN50 to DN200 cover flow rates from 10 to 200 L/s, and every unit is factory performance tested within ±5% of rated values.

 

Applicable Scenarios, Covering All Types Of Sprinkler Fire Extinguishing Needs

 

Commercial Buildings - Office towers, shopping malls and hotels requiring automatic sprinkler systems and indoor hydrant protection

 

Industrial Plants & Warehouses - Manufacturing facilities, logistic centers and storage buildings with high fire load

 

High-Rise Buildings - High-rise residential and commercial complexes needing stable pressure for upper-floor sprinklers and hydrants

 

Underground Parking & Tunnels - Basement garages, metro stations and vehicular tunnels requiring deluge and sprinkler protection

 

Petrochemical & Industrial Sites - Refineries, chemical plants and power stations with demanding fire water supply requirements

 

Municipal & Public Facilities - Schools, hospitals, stadiums and airport terminals needing reliable fire protection water supply

 

Data Centers & Critical Facilities - Server rooms and control rooms where uninterrupted fire water pressure is essential

 

Residential Communities - Housing estates and villas relying on sprinkler and hydrant systems for life safety protection

product-750-750

 

Products Description

 

product-750-750
product-750-750

product-1500-740

product-1500-1230

product-1500-1160

product-1500-1245

Hot Tags: XBD-ISW Horizontal End Suction Fire Sprinkler Pump for Fire Protection Systems | Tengsheng, China XBD-ISW Horizontal End Suction Fire Sprinkler Pump for Fire Protection Systems | Tengsheng manufacturers, suppliers, factory, XBD Horizontal Single stage Fire Pump, Horizontal Single stage Fire Hydrant Pump, terrace pump for fire fighting, tornatech fire pump, two stage centrifugal fire pump, Type XA Horizontal Single stage End Suction Centrifugal Pump

Send Inquiry