Product Overview
The XA Type Horizontal End Suction Centrifugal Pump is a general-purpose pump designed for clean water and liquids with physical and chemical properties similar to water. Its horizontal end suction structure with flexible coupling and common base plate provides stable operation and easy maintenance for building water supply, fire protection, HVAC circulation, agricultural irrigation and general industrial applications.
With flow rates from 12 to 296 m³/h and heads from 15 to 139 m, the pump can be configured according to project-specific hydraulic requirements. Cast iron casing, bronze or cast iron impeller and mechanical seal are standard; various motor powers, material combinations and flange sizes are available for different liquid conditions and system designs.
Each pump is performance tested before shipment, and technical documentation, dimensional drawings and selection support can be provided for project evaluation.
| Parameter | Specification |
| Product Type | Horizontal Single Stage End Suction Centrifugal Pump |
| Pump Model | XA Series |
| Installation | Horizontal / End Suction |
| Flow Rate | 13 – 296 m³/h (3.6 – 82 L/s) |
| Head | 15 – 139 m |
| Motor Power | 1.5 – 132 kW |
| Speed | 2900 rpm |
| Drive Type | Electric Motor |
| Pump Material | Cast Iron |
| Connection | DN32 – DN100 / Flange |
| Voltage | 380 V / 50 Hz / Customized |
| Application | Water Supply / Fire Protection / Irrigation / Industrial |
| Certification | Available |
Product Advantages of End Success Centrifugal Pump
The XA Type Horizontal End Suction Centrifugal Pump combines high efficiency, reliable performance and easy maintenance in a cost-effective design, with optimized hydraulic passageways delivering pump efficiency up to 83% and reducing long-term energy consumption. The flexible coupling drive and dynamically balanced rotor assembly ensure smooth, low-vibration operation with bearing service life over 20,000 hours, while the back-pull-out structure allows impeller, seal and bearing replacement without disconnecting suction and discharge piping. Cast iron casing with bronze impeller and renewable wearing rings provides durable service in clean water, and 304/316 stainless steel wetted parts are available for corrosive liquids. With flow rates from 12 to 296 m³/h and heads from 15 to 139 m, the series covers a wide range of water supply, irrigation, fire protection and industrial transfer applications, and every unit is factory performance tested and hydrostatically tested before shipment to ensure dependable operation.
Product Details
Hot Tags: XA Type Horizontal End Suction Centrifugal Pump for Water Supply and Irrigation | Tengsheng, China XA Type Horizontal End Suction Centrifugal Pump for Water Supply and Irrigation | Tengsheng manufacturers, suppliers, factory, XBD Horizontal Single stage Fire Pump, Horizontal Single stage Fire Hydrant Pump, terrace pump for fire fighting, tornatech fire pump, two stage centrifugal fire pump, Type XA Horizontal Single stage End Suction Centrifugal Pump
