XBD-ISW Horizontal Single Stage End Suction Fire Pump for Fire Hydrant Systems | Tengsheng

Send Inquiry
XBD-ISW Horizontal Single Stage End Suction Fire Pump for Fire Hydrant Systems | Tengsheng
Details
​​​​​​​The Horizontal Single stage Fire Hydrant Pump is specially designed for fire hydrant extinguishing systems, strictly following the national standard "Performance Requirements and Test Methods for Fire Pumps". It has passed the mandatory certification of the National 3CF and combines the advantages of horizontal single-stage structure with efficient hydraulic design.
Category
Horizontal Fire Fighting Pump
Share to
Description

Product Overview

 

The XBD-ISW Horizontal Single Stage End Suction Fire Pump is a direct-coupled centrifugal fire pump designed for reliable water supply in fire hydrant and sprinkler systems. Its horizontal end suction structure with coaxial motor mounting on a common base plate provides stable operation and easy maintenance for building, commercial, industrial, and municipal fire protection applications.

 

With flow rates from 5 to 300 L/s and heads from 30 to 120 m, the pump can be configured according to project-specific hydraulic requirements. Cast iron casing with bronze impeller and mechanical seal are standard; electric motor drive, complete fire pump set configurations and various flange sizes are available for different system designs and local fire code compliance.

 

Each pump is performance tested before shipment, and technical documentation, dimensional drawings and selection support can be provided for project evaluation.

product-750-750

 

Horizontal Single Stage Fire Hydrant Pump Core Advantages

 

The XBD-ISW Horizontal Single Stage End Suction Fire Pump combines a proven direct-coupled design with high-efficiency hydraulic performance, delivering up to 82% pump efficiency and stable non-overloading power characteristics across the full operating range to meet NFPA 20 and local fire code requirements. The back-pull-out structure allows the entire rotating assembly to be withdrawn without disconnecting suction and discharge piping, making impeller, mechanical seal or bearing replacement quick and simple, while the cast iron casing and renewable wearing rings protect against wear and extend service life. With flow rates from 5 to 300 L/s and heads from 30 to 120 m, the series covers a wide range of fire hydrant and sprinkler system demands; dual-pump duty/standby arrangements, stainless steel wetted parts for corrosive water, private-label branding and custom control logic are all available, and every unit is hydrostatically tested at 1.5 times working pressure and performance verified within ±5% of rated values before shipment.

product-750-750
Parameter Specification
Product Type Horizontal End Suction Centrifugal Fire Pump
Pump Model XBD-W
Installation Horizontal / End Suction
Flow Rate 15 – 120 L/s
Head 32 – 160 m
Motor Power 7.5 – 160 kW
Speed 2900 rpm
Drive Type Electric Motor
Pump Material Cast Iron
Connection DN50 – DN200 / Flange
Voltage 380 V / 50 Hz / Customized
Application Fire Protection / Building / Industrial / Municipal
Certification Available

Product Details

 

product-750-750
product-750-750

product-1500-740

product-1500-1230

product-1500-1160

product-1500-1245

Hot Tags: XBD-ISW Horizontal Single Stage End Suction Fire Pump for Fire Hydrant Systems | Tengsheng, China XBD-ISW Horizontal Single Stage End Suction Fire Pump for Fire Hydrant Systems | Tengsheng manufacturers, suppliers, factory, XBD Horizontal Single stage Fire Pump, Horizontal Single stage Fire Hydrant Pump, terrace pump for fire fighting, tornatech fire pump, two stage centrifugal fire pump, Type XA Horizontal Single stage End Suction Centrifugal Pump

Send Inquiry