XBD-L Vertical Inline Fire Booster Pump for Fire Protection Systems | Tengsheng

Send Inquiry
XBD-L Vertical Inline Fire Booster Pump for Fire Protection Systems | Tengsheng
Details
​​​​​​​Our fire booster pump is an auxiliary pressurization device in the fire water supply system. Its main function is to automatically start when the system pipe network pressure is lower than the set value, supplement the pipe network pressure, maintain system stability, and ensure that the fire hydrant and sprinkler head can quickly reach the rated output water pressure in the early stages of a fire.
Category
Vertical Fire Fighting Pump
Share to
Description

Product Overview

 

The XBD-L Vertical Inline Fire Booster Pump is a centrifugal fire pump designed for reliable water pressure boosting in fire protection systems. Its compact vertical in-line structure with coaxial motor mounting saves installation space while providing stable flow and pressure for building, commercial, industrial, and municipal fire protection applications.

 

With flow rates from 5 to 150 L/s and heads from 32 to 150 m, the pump can be configured according to project-specific hydraulic requirements. Electric motor, diesel engine and complete fire pump set configurations are available for different system designs and local fire code compliance.

 

Each pump is performance tested before shipment, and technical documentation, dimensional drawings and selection support can be provided for project evaluation.

product-750-750
Parameter Specification
Product Type Single Stage Vertical Inline Centrifugal Fire Pump
Pump Model XBD-TSL
Installation Vertical / Inline
Flow Rate 5 – 125 L/s
Head 32 – 160 m
Motor Power 4 – 160 kW
Speed 2900 rpm
Drive Type Electric Motor
Pump Material Cast Iron
Connection DN50 – DN200 / Flange
Voltage 380 V / 50 Hz / Customized
Application Fire Protection / Building / Industrial / Municipal
Certification Available

 

The XBD-L Vertical Inline Fire Booster Pump delivers reliable, space-saving pressure boosting for fire protection systems, installing directly onto the pipeline with coaxial suction and discharge ports to reduce floor space by over 60% compared with horizontal pumps and eliminating the need for a concrete foundation. The optimized hydraulic design achieves pump efficiency up to 82% with a flat head-capacity curve, maintaining stable discharge pressure from zero to rated flow and meeting NFPA 20 non-overloading power requirements. The dynamically balanced rotor and rigid cast iron casing keep noise below 60 dB(A) at 1 m and vibration below 2.8 mm/s, making it suitable for installation in occupied buildings, hospitals and commercial facilities. Standard silicon carbide mechanical seal provides zero-leakage operation with service life over 8,000 hours, and the back-pull-out structure allows impeller, seal or bearing replacement without disconnecting piping. With flow rates from 5 to 150 L/s and heads from 32 to 150 m, the series covers a wide range of hydrant and sprinkler demands; dual-pump duty/standby arrangements, stainless steel wetted parts, private-label branding and custom control logic are all available, with every unit factory performance tested within ±5% of rated values.

product-750-750

 

Product Details

 

product-750-750
product-750-750
product-750-750

product-1500-740

product-1500-1230

product-1500-1160

product-1500-1245

Hot Tags: XBD-L Vertical Inline Fire Booster Pump for Fire Protection Systems | Tengsheng, China XBD-L Vertical Inline Fire Booster Pump for Fire Protection Systems | Tengsheng manufacturers, suppliers, factory, home fire fighting water pump system, priming fire pump, residential fire pump, fire fighting pump, fire fighting water pump, Vertical Pipeline Fire Pump

Send Inquiry