Product Overview

Diaphragm Pump for Mining Slurry produced by Tengsheng in Shanghai
The mining mud diaphragm pump is a positive displacement pump designed specifically for the transportation of high concentration, high abrasion, and solid particle containing mud/slurry in mines. It is driven by pneumatic/electric dual drive and has a diaphragm isolation structure as its core. It has the key advantages of no leakage, anti-wear and anti blocking, strong self-priming, and can operate freely. It can transport mining mud with a solid content of ≤ 70% and a particle diameter of ≤ 50mm, and is suitable for harsh working conditions such as underground explosion prevention and long-distance tailings transportation. It is a core equipment for mining environmental protection and efficient production.

Product Advantages

1. Our Diaphragm Pump for Mining Slurry is developed to address the characteristics of mining mud, such as high abrasion, high solid content, high viscosity, and large fluctuations in operating conditions. The pump chamber volume is adjusted by reciprocating the diaphragm to achieve suction and discharge. The diaphragm completely isolates the medium from the driving components, and the overcurrent components are made of wear-resistant and anti-corrosion materials, supporting explosion-proof design. It can be adapted to underground, beneficiation plants, tailings ponds, and other scenarios, with a flow rate coverage of 1-1000m ³/h and a pressure of up to 100bar, meeting the mud transportation needs of the entire mining process.

2. Wear resistant and leak proof+adaptation to extreme working conditions+low maintenance costs, solving the pain points of traditional pumps that are prone to wear, frequent leakage, and difficult to operate, achieving triple benefits of "extending equipment life by three times, reducing maintenance costs by 60%, and zero environmental leakage risk", and adapting to mining safety production and environmental compliance requirements.

3. Diaphragm isolation+no shaft seal, zero leakage and anti abrasion dual diaphragm opposed structure, completely isolates the mud from the driving components, and the no shaft seal design completely eliminates abrasive mud leakage (leakage rate ≤ 0.01%); The overcurrent components are made of wear-resistant cast iron/rubber lining/316 stainless steel, and the diaphragm is made of nitrile/fluororubber/PTFE, suitable for high abrasion and corrosive mud. The diaphragm life can reach 8000-16000 hours.

Selection specifications

No.	Model	Rated Flow (m³/h)R	Rated Head (m)
1	QBY-10	0.8	50
2	QBY-15	1	50
3	QBY-25	2.4	50
4	QBY-32	6	50
5	QBY-40	8	50
6	QBY-50	12	50
7	QBY-65	16	50
8	QBY-80	24	50
9	QBY-100	30	50