Product Introduction

The diaphragm pump for coating transportation produced by Shanghai Tengsheng is a positive displacement pump designed specifically for viscous, particle containing, and easily sedimentable media such as coatings, paints, and inks. The core adopts a pneumatic/electric dual drive mode, and the medium transportation is achieved through the reciprocating motion of the elastic diaphragm. It has the core advantages of no shear, no leakage, self-priming, and anti sedimentation, and can adapt to high viscosity (up to 100000 cP) and pigment particle containing coating media. It is widely used in painting production lines, coating filling, spraying operations, and other scenarios.

Product Advantages

1. Diaphragm Pump for Coating Transfer enables
Coating transportation with "zero damage, zero leakage, and zero failure" solves the pain points of traditional centrifugal pump shear damage to coating components, gear pump blockage, and high maintenance costs of screw pumps, achieving the triple benefits of "quality assurance+pollution prevention+loss reduction", and adapting to the entire process of coating production, filling, and spraying transportation.

2. Diaphragm Pump for Coating Transfer pneumatic diaphragm pump QBY/QBK series compressed air drive, explosion-proof and spark free; Strong self-priming ability (suction range of 5-8m); Can run idle without damage; The flow rate can be regulated by air pressure in flammable and explosive paint workshops, spraying production lines, and paint bucket unloading
Easy installation of water-based latex paint, acidic paint, electrophoretic paint transportation

3. To ensure the quality of the coating, a volumetric diaphragm reciprocating structure is adopted, without rotating impellers or gear meshing. The medium is transported without shear or stirring, avoiding the breakage of pigment particles and resin emulsification and layering in the coating, ensuring uniform color and strong adhesion of the paint film after coating, and greatly reducing the rework rate of the coating.
Transporting granular coatings: Install a Y-shaped filter (filter aperture ≤ 3mm) before the pump to prevent large particles from scratching the diaphragm;

Product Description

Bucket pump unloading:

Optional pneumatic mixer, stirring and pumping at the same time to avoid sedimentation;

Precise flow control:

Install flow meters and regulating valves to match the flow requirements of spraying/filling.

Installation and maintenance suggestions:

The installation height of the pump body should be lower than the paint bucket to shorten the suction distance and improve the self-priming effect.

Regularly check the wear of the diaphragm, replace it promptly if any damage is found, and avoid medium leakage;

Before transporting different types of coatings, thoroughly clean the pump chamber to prevent contamination from mixing different coatings.

Selection specifications

No.	Model	Rated Flow (m³/h)R	Rated Head (m)
1	QBY-10	0.8	50
2	QBY-15	1	50
3	QBY-25	2.4	50
4	QBY-32	6	50
5	QBY-40	8	50
6	QBY-50	12	50
7	QBY-65	16	50
8	QBY-80	24	50
9	QBY-100	30	50